15 July 2012

The Morse Thermometer - Part 2

Reverse Engineering a Solar Lamp
Part 1 of this post is a write-up of my project for a thermometer with Morse code output. But I was not satisfied with the relatively high power consumption of the circuit, so I decided to use a solar cell to supply the circuit.

A cheap source of solar cells these days are solar garden lamps. You get them for very little money in garden centres and DIY shops. So I went and bought one. The general idea was that such a lamp would not only give me the solar cell, but also a water-tight enclosure, a rechargeable battery and a boost circuit so that all aspects of the power supply would be covered.

And the supply should be more that sufficient for my purposes, since in my thermometer, the LED would only switch on a fraction of the time. By setting the display cycle time carefully, it should be possible to supply the thermometer for 24h per day.

23 May 2012

The Morse Thermometer - Part 1


Project Features
  • Extremely simple hardware
  • Low-Cost
  • Uses the internal temperature sensor of the ATtiny25 
Introduction
I used to have one of those electronic thermometers with an outdoor sensor. That sensor transmits its readings through an RF link. Except that it didn't really work. Every now and then I had to reset the thermometer so that it would re-connect to the sensor. This annoyed me and I thought maybe I could make something that actually works.

Well, that was my excuse for this project...

7 April 2012

A USB/ISP Programmer (Part 2)

Programming Software for the USBasp

There are several interesting options, how to use the USBasp programmer. The LCSoft variant was sold with the option to download a program called ProgISP V1.72 from the vendors site. Also, a schematic was available as well as the drivers for Windows. Installation was no problem. I found no user manual in English, but usage of the software is fairly straight forward.